Atex Vacuum Cleaner +accessories
Safe Powder Recovery and Cleaning
*FEDEX shipment and cost will be added to the final invoice
A perfect solution for efficient collecting and cleaning unsintered powder. The compact dimensions of the device along with high collection capacity is crucial if you have limited space. Along with the cyclone powder separator it will make your workflow much faster and easier.
Fast
Clean your printer and collect the unused powder in 10 minutes. Save time and money.
Save time and money. Make your printer ready for a next print in less than 10 minutes. With the powder separator you can use the ATEX Vacuum not only for cleaning, but also to collect all the unsintered powder in a dedicated container and quickly prepare it for a next print.
Clean
With the ATEX Vacuum Cleaner you can clean your workspace with a few simple moves.
Eliminate the mess in your workplace and recover 100% of powder. With the ATEX Vacuum you can gather the powder spilled during the printout cleaning – both from the workshop and from the printout surface. In 100% safe way.
Eeasy Powder Recovery
Minimize your workflow: collect the powder and clean your workspace with one device.
With the help of Sinterit separator, collected powder is automatically put into the dedicated container, without the need of manual transfering. Afterwards it can be easily poured into the Sinterit Sieve, or just closed and left for further processing.
Two Functions
Powder Separator
It separates the powder from flowing air and puts it into a dedicated container.
This separator is designed by our R&D team especially for SLS and Sinterit’s printers – this highly effective separator helps you recover all of the unsintered powder and use it again in the next print job. All unsintered powder from the print can be put into a dedicated 12L container. Then the vacuum can be used in a traditional way to clean the workspace.
| Product features | |
|---|---|
| Vacuum Dimensions | 440 x 420 x 780 [mm] | 17.3 x 16.5 x 30.7 [in] |
| Separator Demensions | 550 x 305 x 300 [mm] | 21.7 x 12 x 11.8 [in] |
| Weight - Vacuum | 25 [kgs] | 55 [lbs] |
| Weight - Sparator | 5 [kg] | 11 [lbs] |
| Power Supply | 230 V / 50Hz [100 V / 60Hz] |
| Power Consumption | 1.1 [kW] |
| Noise Level | 77 dB [A] |
| Maximum Air Flow | 215 m cubed/h |
| Maximum Capacity | 40 [L] printing power or dust in vaccum, 12 [L] in separator |
| Vacuum Certification | ATEX zones Z22 or INTERTEK |
| Set Contains | Vacuum, set of accessories, Separator with 12 L metal container, user manual |
| Full Specification | https://www.sinterit.com/atex-vacuum-cleaner/ |
- Product Number:
- FZ189
- Brand
- Sinterit
- Availability:
- Allow 3 weeks for air freight shipment
Related Products
3D Systems
MCO Cleaner 2500 (1.0 kg)
- Product Number:
- 24212-915
Post Prcessing Material Flush To be used during material changeover procedure to achieve complete material flush, for ProJet MJP 2500 Plastic Series. Compatible With ProJet 2500
Photocentric
Photocentric Resin Cleaner 30 20L
- Product Number:
- RCL30RD20
Advanced Cleaning Solution *FEDEX shipment and cost will be added to the final invoice Photocentric Resin Cleaner, the advanced cleaning solution for 3D post processing. Our cleaner can be used...
Photocentric
Photocentric Resin Cleaner 30 1L
- Product Number:
- RCL30RD01
Resin Cleaner *FEDEX shipment and cost will be added to the final invoice Photocentric Resin Cleaner 30 has been designed to exceptionally clean excess of photopolymer resin off from 3D printed parts...
Photocentric
Photocentric Resin Cleaner 30 5L
- Product Number:
- RCL30RD05
Resin Cleaner *FEDEX shipment and cost will be added to the final invoice Photocentric Resin Cleaner 30 has been designed to exceptionally clean excess of photopolymer resin off from 3D printed parts...