Sinterit Sandblaster 230V
$1,700.85
(Inc. GST)
$1,479.00
(Ex. GST)
Perfectly Smooth Surface
The Sandblaster is designed for cleaning, polishing, and finishing of printouts, using dry Abrasive Material. Thanks to some compressed air and little glass balls (Abrasive Material) using Sandblaster you can penetrate all of the corners of your model and highlight every detail.
Clean and Easy Process
Post-processing of SLS printed parts is an easy task. You don’t need to remove any supports, neither mechanically nor chemically. All you need to do is to get rid of spare powder connected to your printed parts. The best and cleanest method is to use compressed air and a sandblaster. With this device you will clean and polish the surfaces.
Specification
Product features | |
---|---|
Dimensions | 480 x 370 x 360 [mm] | 18.9 x 14.5 x 14.1 [in] |
Weight | 15 [kg] | 33 [lbs] |
Working area | 410 x 310 x 200 [mm] | 16.1 x 12.2 x 7.9 [in] |
Power supply | 6 [W] |
Max pressure | 125 [psi] | 8.62 [bar] |
Abrasive material | glass balls 200 [μm] |
Abrasive material container capacity | 5,44 [kg] | 12 [lbs] |
Input voltage | 230 [V] / 50 [Hz] | 120 [V] / 60 [Hz] |
Air consumption | 290 [l / min] |
Full specification | Sinterit SANDBLASTER specification |
- Product Number:
- FZ122
- Brand
- Sinterit
- Availability:
- Allow 3 weeks for air freight shipment